Best Auto Promo Sale Product provide printers sales, printer cd, dvd printer Hurry! Flash Deal Cheapest auto CD DVD PVC printer with 1 set glossy oil coating machine Doggy for sale. Get 19% discount Now! Now US $1209.33/lot. Hurry buy Now before back to normal price! Normal price US $1493.00. Dont waste your time. Buy Now only in All-PRINTER PARTS Store Trusted Seller Store!
L800 high speed and quality Auto CD/DVD/PVC printer with glossy oil coating machine.( Export for Europe and America version)
The 2015 Europe and American version auto CD printer main features and improvements:
1) Use the exclusive comprehensive integrated sensor(original imported ) for the tray down falling and promoting action.Completely solved the problems shaking by delivery or prolonged use.
2) Replace the native feed sensor(Mechanical action) with the exclusive comprehensive integrated sensor(original imported).
3) Change the chip of the main board upgraded to native L800 models,use L800 drivers.
4) L800 dedicated CISS, cartridge without chips and dampers, no need cumbersome chip identification, even if there is no cartridge in the ink driver,the ink lamp of the printer will not light. It’s very magical!
5) The cartridge is same as a damper, creativity no have front and back ink chamber.Pull the ink from CIIS,prevent the excessive air in the cartridge from break the printing.
6) The cartridge is same as a damper, It’s above 80% lighter then normal cartridge,to reduce the ink vehicle spindle and belt motor load and prolong the service life of the printer.
7) After filled with ink and installed vertically,the CISS ink tank nature pressure will be balance,reduced the wrong operation.Super large ink capacity of 80ml/color, for printing thousands of disks you just need one time ink refilling.
8) Free reset software for inks,you can reset the ink level to 100% in any time,no half disc printing situation!Help customers reduce to wast about 200pcs discs every month.
9) Replace the three stainless steel pillars with four petal type tray under the hopper,the tray will centered automatically when it fall down.
Personal development and production,absolute factory prices,5 years experience of developing Auto CD/DVD/PVC printer
Ensure secondary development modification from original and new T50/R270 printer,The T50 printer has been converted into L800 printer without CISS chips.Fully compatible with Print CD software, Core Draw/Adobe Illustrator image editing software.
Quality mode:80s/PC(photo resolution, CD/DVD);
Speed mode:30s/PC(Photo resolution, photo quality ink jet);
1set ink(6 colors,100ml per color) can print about 4000-5000pcs CD/DVD disc.
1set ink(6 colors,100ml per color) can print about 5400-6000pcs PVC cards
Automatic continuous feed tray out tray.
We will calibrated the head nozzle by special tool to keep high printing resolution before out of the factory for everything printer.
The best 2.8mm thickness CD printer tray in China,precision injection molding,super flat and thin, do not slanted when loading disc 50pcs once,use the tray patent three jaw to make the disc stable, it’s easy to transfer and take the disc, it will not rotate and fall off when it printing,do not chuck tray,reduce waste of misprinting,beyond the original Ep disc tray,Compatible 12CM, 8CM, business cards and special-shaped discs.
Unique patented buckle design PVC tray,four snaps to make the PVC card stable,precision injection molding.Other craving PVC tray will be arch in the center of the card when too tight and will not fixed the cards when it too loose.
Description of CD/DVD glossy oil Coating Machine
1. Pictures
2. Technical Parameters
Working width:140mm
Nominal voltage:220v
power:450W
SJFM speed:4m/min
Lamp Lifetime:1000hours
Dimensions:400*550*220mm
Curing method:UV curing
3. Coating Material
CD dedicated Coating machine for disc surface coating after printing.
4. Usage
1) Take out machine and put it on the flat table, install the 4 machine angle (black color) into every angle (small hole) at the bottom of machine and disc tray separately. As following pictures:
2) Pour glossy oil into Liquid storage tank (liquid depth can not be more than 1.5cm). And put tank under rubber roller (red color), then put Pipette into tank.
As following pictures:
3) Plug in (connected machine with power line and socket). Open three switch (right side is main switch, middle is UV lamp switch, left side is circulated liquid switch), then machine stars working. UV lamp needs warming, let machine tick over around 3minutes in advance. After that, you can start coating CD/DVD after oil poured over the entire rubber roller.
As following pictures:
4) For 1st time using, if you still can not find glossy oil on the rubber roller after machine opening
3-5minutes, it means there is some air in the circulated pump (the exit of liquid) so that oil can
not pour out. At this time, you can use syringe to deflate the air
outwards from the exit of pipette.
As following pictures:
5) Put one disc on the tray (words upward), and push disc into the bottom of rubber roller slowly, the machine will coat automatically by itself, the disc will be sent out from the back of the machine once finished
As following pictures:
6) If you feel coated oil is too thin or too thick, you can use hexagon wrench to adjust the gap of two rubber roller. Firstly open the cover which is above rollers, you can see clearly there are 2 small aluminum on both side in the front of roller , and there are 2 small holes. Please put hexagon wrench into the hole, make it rotated clockwise if you need coated oil thin, the gap between rollers will be narrow. If you need coated oil thick, you can make it rotated counter clockwise, the gap will be wider.
As following pictures:
7) If not to use the machine for long time, you’d better clear rubber rollers before you store it. Pull the alcohol into the storage tank to replace the glossy oil, and keep the machine working for a while. Or open the cap of the rubber roller, pull the alcohol between the 2 rollers, keep the rollers work for a while, or use a piece of cotton with alcohol clean the rubber roller.
5. Note:
1) If the machine doesn’t work when power on, please check whether the fuse is intact, the fuse is under the electric plug socket. As following pictures:
2) The machine must be placed on a horizontal table.
3) Do not let the sunlight direct to the machine, try to put the machine at a clean and ventilation place.
4) After turn off the light, please do not turn on the light immediately, you must let the UV lamp cooled then turn on. It means after about 2 minutes, you can turn on the light and continue to work, otherwise it will affect the lamp life, or damage the lamp directly.
5) Normally the UV lamp use life is about 800-1000hours, if you find the lamp can not on and the coat surface is sticky, it means that the lamp is near the end of life, you need change the lamp on time.
Advantage:
1) Coating the glossy oil on the CD disc.
2) To making the CD surface more glossy and protect the CD from soiled.
3) To preventing the design on the CD from water and moisture.
4) If don’t coating the glossy oil, the design on the CD will be halo color and fade after damp for printed for a long time.
Return Policy
If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service
On-time Delivery: If you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).Super Promo Cheapest auto CD DVD PVC printer with 1 set glossy oil coating machine Doggy for sale
No comments:
Post a Comment