Motorcycle 800m Intercom Motocicleta Function Headset Intercomunicador Helmet Stock Gloves Bluetooth Fm Phone/gps/mp3 Big New Hector Rickey Rating: 3.9 out of 5
Introduction:
This interphone is designed for the motorcycle rider and passenger who wish to have clear and reliable wireless communications while riding. This headset is compatible with Bluetooth cell phones, GPS, mp3 and can be suited to any sort of helmet for motorcyclists.
Features:
Full duplex interphone
Wireless headset for bluetooth enable cell phone at a range of up to 10 meters. Bike-to-bike intercom for rider& passenger or two separate bikes up to 800 meters.
Wireless communication between three riders by Bluetooth system.
Wireless bluetooth music receiver and speaker, enjoy streaming music from cell phone or other device through A2DP.
Hands-free for your capable cell phone, enable you to drive intently and safely.
Receive the audio navigation message from your Bluetooth enabled GPS.
Automatic switch between bluetooth cell phone, intercom, stereo music.
With DSP echo cancellation and noise suppression technology, crystal clear voice quality is guaranteed in a high speed.
Button panel is more stable structure and better waterproof performance.
Easy install and operation, fits all kinds of helmets (open/full/half face).
Ideal for motorcycle and skiing helmet.
Functions:
Receive a cell phone call automatically
Control cell phone music through AVRCP: forward, backward, play, pause
Support FM Radio
Call answer, call reject, call hang up and last dialing number redial function
Dial the last numberSpecifications:
Production dimension: 8.3x3x2.2cm
Color: Black
Bluetooth vision: 2.1+EDR
Power supply unit: 5V USB / UK Plug
Battery capacity: 400mAh
Power adapter: DC 5V 1000mA
Phone talk: up to 10 hours
Working time: 8 ~ 10hours
Standby time: 300hours
FM range: 88mHz -108mHz
Mounting the Inter Phone:
1. Take your Inter Phone Headset and slide it down into the slots in the Headset Clip Mount. Make sure that it\s perfectly fitted and locked into place by trying to extract it, pulling upwards.
2. Now you need to attach the speaker and microphone arm to the inside of the helmet. Take the pad which the speaker will attach to, and test for the best position to fix it. The Pad should be fixed at the height of your ear in the helmets ear pocket. You will need to put the helmet on a few times to find the optimum position to apply the pad. When the correct positioning is found, remove the protective strip and apply the Pad.
3. Next, take the Ear Speaker and attach it to thePad. Run the Microphone Arm down along down to where your mouth will be. As the Microphone Arm is flexible, you can adjust it so it sits in the optimum position in front of your mouth. Some helmets have removable padding; if yours does, it is recommended to run the speaker and microphone under the padding.
4. Taking care to match the pins up, connect the Headset Plug to the Headset Socket. The plug can only be inserted in one position.
5. Secure the cord of the Headset Plug inside the helmet. Tuck any extra wire into the helmet. Ensure that only few centimeters of the cord comes out. You have successfully mounted the Inter Phone.
Turning the unit on into standby mode:
Press and hold the small black power button at the end of the unit. After 3 sec you will hear a “Di” and the blue LED will begin to flash. Let go of the button and the unit is now in standby mode.
Turning off the unit:
Press the small black power button for 5 seconds or until you hear 2 “Di” tones and the lights extinguish.
To pair to your Bluetooth enabled mobile phone:
When the unit is off, press and hold the small black power button at the end of the unit. Hold the button until you see a RED AND BLUE light flashing. It normally takes around 5-8 seconds from off. Do not let go when you see the blue light. You will also hear a “DuDu” tone when the unit enters pairing mode. On your phone, search and attempt to pair to the device, when the device is flashing red and blue. If requested the pairing code will be 0000 and you should set the phone to auto pair to the device.
To Pair 2 devices in intercom mode
When both devices are turned off, press and hold the small black power button on both devices until both units flash red/blue repeatedly. You need to hold the button for more than 6 seconds and dont let go when you see the blue light.
Short press the black power button on ONE of the two devices and this device will search and auto-pair to the other in intercom mode. A live call will be initiated.
If this fails retry it ensuring both red/blue light sequences are initiated simultaneously and are close together. Also ensure any other Bluetooth devices are turned off.
When paired, you do not need to go into pairing mode again. In future you only need to go into standby mode (blue light flashing) on both units and press the button on one of the devices.
To Pair 3 devices in intercom mode
Follow the above procedure for each combination of the three units. (A-B, B-C, A-C).
Ensure the third unit is switched off when pairing the other two devices.
Only 1 connection can be live at a time. When successfully paired the connections can be switched by ending any live call and returning to standby.
From Standby press the power/intercom button 1 time for one of the pairings to be called, or 2 times for the other pairing to be called.
The pairing for 1 or 2 presses will depend on the sequence in which you paired the 3 helmets, but once paired the relevant pairings will maintain the number.
i.e. A will press the power/intercom button 1 time to call B and 2 times to call C. B will press the button 1 time to call C and 2 times to call A. C will press the button 1 time to call A and 2 times to call C.
To Reset the pairing memory:
If you have problems pairing, then it is best to reset the pairing memory
Turn on the relevant unit into standby mode. Press the power/intercom button for 3-5 seconds till a “dudu” can be heard. This should be before the unit switches off.
Let go of the button when the tone is heard.
Turn off the unit and restart, the memory will be erased.
To Use FM Function:
1. Headset idle status, press MFB twice to turn FM on.
2. When FM is on, turn the MFB clockwise or counterclockwise and it will seek
out the next or previous FM station and begin playing.
3. When FM is on, press MFB twice to turn FM off.
Original Accessories:
How to attach the device to helmet. (Note: Package not contain Helmet)
Package content :1 x Bluetooth receiver
1 x USB Cable
1 x Screw Driver
1 x Power Adapter
4 x Felted Adhesive Earphone Pads
1 x Ear Speaker and Microphone Headset
1 x Headset Clip and Fastening Screws
| 1. We will send the correct Plug Adapter that suitable for the country in the shipping address: | ||||||||
|
Return Policy
If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service
On-time Delivery: If you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).Motorcycle 800m Intercom Motocicleta Function Headset Intercomunicador Helmet Stock Gloves Bluetooth Fm Phone/gps/mp3 Big New
No comments:
Post a Comment